Skip to product information
1 of 3

Laser Wood Supplies

Pre-Finished 5/32 Cedar / Cedar for laser cutters / Double sided, MDF core

Regular price $13.50 USD
Regular price Sale price $13.50 USD

Pre-Finished Cedar takes all the prep-work out of your next project.  This wood comes with a durable Semi-Gloss clear coat already applied, saving you time so you can focus on crafting and not material prep.  Not only that but you save even more time because there's no need to mask it!!!  Just use a baby wipe or soft lint-free cloth to wipe up any laser char residue, saving you time and money.

-A1 Double sided material; Glitter-free (no more of the annoying metal flakes), No masking necessary.

*****AROMATIC CEDAR MAY CONTAIN A LOT OF KNOTS. IF THEY ARE CAUGHT AT MANUFACTURING, THEY ARE FILLED AND PAINTED AS CLOSE AS POSSIBLE TO MATCH THE MATERIAL.  SEE ENCLOSED PICTURES FOR EXAMPLE OF FILLED HOLES.  IF THEY FALL OUT DURING TRANSPORT THERE MAY BE A SMALL HOLE IN THE VENEER LAYER.*****

 ***THICKNESS OF BOARDS MAY VARY SLIGHLY BY SPECIES.  ALWAYS USE CALIPERS TO GET TRUE THICKNESS***

Boards are cut 11 3/4" by 19" by hand. There may be very slight variations but they will be very close to the size listed. These boards fit perfectly within a Glowforge and cut/engrave perfectly.

RECOMMENDED SETTINGS: Cedar = Med Cherry ply (proofgrade setting/ Auto Focus). These settings are a good starting point for your Glowforge but may need to be adjusted to your specific machine/conditions.

 ****************

All Continental US and non PO Box orders are shipped via UPS Ground.  Shipping rates are as follows:

Prefinished woods / all 5/32nd inch thick woods

Medium Box  $18 ---- 1-10 sheets

Large Box  $24 ---- 11-19 sheets

XL Box $32 ---- 20-35 sheets

***These are estimates of how many fit per box.  It can vary slightly due to actual wood thickness.  We will do our best to save our customers money and will issue a refund on shipping overage if we can get a cheaper rate.

Customer Reviews

Based on 2 reviews
100%
(2)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
C
Christopher B
So clean

I love these pre-finished sheets, the finish is smooth, clean, consistent and wipes clean so easily after cutting/engraving! Because of the rich and varied colors of Cedar it feels a little bit more like the coating is ON the wood rather than soaked into it (as it is if finish them myself and juxtaposed to the mahogany pre-finish, where that effect is not as noticeable), but is is clean and clear and otherwise all better and easier that DIY, so definitely not a complaint just an observation.

S
Stephanie Griffin
Gorgeous wood that cuts well

This was my first time with cedar and it wiped perfectly clean even with deep engraving. Not a single scorch mark remained after the light baby wipe cleanup.